| Epoxy Floor
Coating (One Colour): |
|
| Step 1: |
|
|
Clean the surface of the
garage floor. Simply use a broom and try to remove any
items, small rocks and dust from its surface.
|
|
| Step 2: |
|
|
Mask the walls to avoid any
damages. Use plastic sheets and masking tape and try to
cover as much as you can.
|
|
| Step 3: |
|
|
For New or Bare Concrete you
need to acid wash the floor. Mix the product with water
and start washing the surface. Always start in one
corner and work your way out slowly. Once you have done
that it is time to wash it off. Use the garden hose and
start the washing in the same corner as before. When you
are finished, let the concrete dry. For more
information, please read the instructions indicated on
the actual product.
|
|
| Step 4: |
|
|
Clean the surface of the
garage floor by using a vacuum cleaner. Once you have
done that, get some masking tape and stick it onto the
floor. Peel it off. It is an easy way to check the
surface if it needs more cleaning or not. If you still
see dust on the tape, vacuum it again. It is a very
important step so try not to save time by doing it!
|
|
| Step 5: |
|
|
Fix any big cracks, damages on
the surface of the concrete using Luxepoxy Filler.
|
|
| Step 6: |
|
|
Once all the preparation work
is done, it is time to apply the epoxy floor coating.
Read the instructions carefully before you start. Also
check the colour before mixing the product. Before you
start make sure that the area is well ventilated! If you
are ready, mix the two compounds. Let it sit for about 5
minutes. Now start applying with a brush. Always start
in one corner and work your way out. Apply the product
with brush and roller. Please keep in mind that you have
to work in small sections. No more then 10sqm at a time.
Once the whole area is painted, let it dry for 12-24
hours.
|
|
| Step 7: |
|
|
On the following day repeat
"Step 6". Applying the second coat is always
easier. Using the same method start in one corner and
work your way out. Once you have done that, let it dry
for at least 24 hours before stepping on the newly
installed surface. Please remember that there is a
difference in a touch dry and a completely dry surface.
You need to wait 48-72 hours before you can park any
vehicle in the garage.
|
|
|
DULUX
Luxafloor ECO2 - Product Data Sheet
|
|
DULUX
Luxafloor Aggregate - Product Data Sheet
|
|
| Useful
Links: |
|
|
Where
to buy and how to choose the Right Products?
|
|
|
|
EPOXY
Installation (Flake) - (2 PACK)
|
|
|
|
Garage
Floor Painting
|
|
|
|
Driveway
Cleaning
|
|
|
|
Deck
Restoration
|
|
|
Always read the Safety Instructions
before |
|
using a product! |
